Part Number Hot Search : 
LTC1325 ALE13F12 ADS6445 A1108AG2 ZPY5V1 TDA8390 STJ828M BAV99
Product Description
Full Text Search
 

To Download ATR0885 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Features
* * * * * * * * *
Three Selectable Outputs All Outputs Can Be Used Either for Standard (5V) or High Voltage (9V) Maximum Output Current at All Outputs Up to 150 mA On-chip Low-EMI RF Oscillator With Spread-spectrum Technology Control of 3 Different Swings Using 3 External Resistors Oscillator Frequency Range from 200 MHz to 500 MHz Maximum Oscillator Current Amplitude 100 mApp On-chip High-gain Transimpedance (IV) Amplifier Small Green QFN24 4 mm x 4 mm Package
Applications
* * * *
HD-DVD/DVD/CD ROM Drives Blu-ray/DVD/CD ROM Drives HD-DVD/DVD/CD Player Blu-ray/DVD/CD Player
3-output Laser Driver for HD-DVD/ Blu-ray/DVD/ CD-ROM ATR0885 Preliminary Summary
1. Description
ATR0885 is a laser diode driver designed to operate three different grounded or floating laser diodes for reading CDs ( = 780 nm), DVDs ( = 6 50 nm ), a nd HD-DVDs/Blu-ray ( = 405 nm). An on-chip, low-EMI RF oscillator is available to reduce laser mode hopping noise. The oscillator's current amplitude can be set independently for the three selectable outputs using three resistors (RSA, RSB, RSC). The frequency setting is common to all IOUT outputs via a single resistor (RF). A logic high level on the ENOSC pin enables the spread-spectrum RF oscillator. The ATR0885 also includes a fast-settling transimpedance amplifier. It is provided to interface between the front-end monitor photo diode and the adaptive laser diode power control circuit. The gain of the transimpedance amplifier can set independently for each of the three outputs using the resistors RTIA, RTIB and RTIC.
Rev. 4923AS-DVD-02/06
Note: This is a summary document. For more information please contact your local Atmel sales office.
Figure 1-1.
Block Diagram
RTIA RTIB RTIC PDIN VREF
Transimpedance amplifier
PDOUT
IR
Read channel
Block enable
VCCA IOUTA VCCB IOUTB VCCC IOUTC
SEL2 SEL1
Logic
ENOSC
RF oscillator
2. Pin Configuration
Figure 2-1. Pinning QFN24
IR RSC RSB RSA RF GND
GND SEL1 SEL2 ENOSC VCCS PDOUT
1 2 3 4 5 6
24 23 22 21 20 19 18 17 16 15 14 78 13 9 10 11 12
2
ATR0885 [Preliminary]
4923AS-DVD-02/06
GND VREF PDIN RTIA RTIB RTIC
RF RSA RSB RSC
IOUTA VCCA IOUTB VCCB IOUTC VCCC
ATR0885 [Preliminary]
Table 2-1.
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Paddle
Pin Description
Symbol GND SEL1 SEL2 ENOSC VCCS PDOUT GND VREF PDIN RTIA RTIB RTIC VCCC IOUTC VCCB IOUTB VCCA IOUTA GND RF RSA RSB RSC IR GND Type Supply Digital Digital Digital Supply Analog Supply Analog Analog Analog Analog Analog Supply Analog Supply Analog Supply Analog Supply Analog Analog Analog Analog Analog Supply Function Ground, power supply Logic pin 2 to select IOUT/ENABLE IC Logic pin 1 to select IOUT/ENABLE IC Digital control of RF oscillator +5V power supply for internal circuit IV amplifier output Ground, power supply Reference voltage input Photo-diode input External resistor defining transimpedance IOUTA External resistor defining transimpedance IOUTB External resistor defining transimpedance IOUTC +5V to +9V power supply for IOUTC Output current source C for laser diode +5V to +9V power supply for IOUTB Output current source B for laser diode +5V to +9V power supply for IOUTA Output current source A for laser diode Ground, power supply External resistor to GND; sets frequency of oscillator External resistor to GND; sets swing of oscillator A External resistor to GND; sets swing of oscillator B External resistor to GND; sets swing of oscillator C 500 to ground Input current bias; -
3
4923AS-DVD-02/06
3. Absolute Maximum Ratings
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Parameters Supply voltage Supply voltage output stages (VCCA, VCCB, VCCC) Input voltage Differential voltage Power dissipation Output voltage Junction temperature Storage temperature Notes: 1. RthJA 115K/W at Tamb = 70 C 2. RthJA 115K/W at Tamb = 25 C 8, 9 Pin Symbol VVCCS VVCCH VPDIN Vdiff_8,9 Pmax Vout Tj Tstg 0.7 Value -0.5 to +6.0 -0.5 to +9.5 -0.5 to Vcc+0.5 |0.5|
(1)
Unit V V V V
(2)
to 1
W V C C
-0.5 to Vcch-1 150 -65 to +125
4. Thermal Resistance
Parameters Junction ambient Note: 1. Symbol RthJA Measured with multi-layer test board (JDEC standard) Value 50
(1)
Unit K/W
5. Recommended Operating Conditions
Parameters Supply voltage High supply voltage (VCCA, VCCB, VCCC) Input current Output voltage range External resistor to GND to set oscillator frequency External resistor to GND to set oscillator swing Operating temperature range Transimpedance resistor Total capacitance at PDIN Load resistance Load capacitance Reference voltage Symbol VVCCS VVCCH IIR VPDOUT RF RS1, RS2, RS3 Tamb RTI CPD RLoad CLoad VREF Value 4.5 to 5.5 VVCCS to 9.0 <2 0.8 to (VVCCS - 1.8) >3 > 100 0 to +70 1 to 50 < 15 >5 < 30 1.6 to 3.0 Unit V V mA V k C k pF k pF V
4
ATR0885 [Preliminary]
4923AS-DVD-02/06
ATR0885 [Preliminary]
6. Ordering Information
Extended Type Number ATR0885-PFQW Package Green QFN24 (4 mm x 4 mm) Remarks Taped and reeled
7. Package Information
Package: QFN 24 - 4 x 4 Exposed pad 2.6 x 2.6 (acc. JEDEC OUTLINE No. MO - 220) Dimensions in mm Not indicated tolerances 0.05 0.90.1
+0
4 2.6
0.05-0.05 24 1
18 19
24 1
technical drawings according to DIN specifications
6
13 12 7
6
0.5 nom. Drawing-No.: 6.543-5101.02-4 Issue: 1; 03.06.05 2.5
5
4923AS-DVD-02/06
Atmel Corporation
2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600
Atmel Operations
Memory
2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse 2 Postfach 3535 74025 Heilbronn, Germany Tel: (49) 71-31-67-0 Fax: (49) 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759
Regional Headquarters
Europe
Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500
Microcontrollers
2325 Orchard Parkway San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 La Chantrerie BP 70602 44306 Nantes Cedex 3, France Tel: (33) 2-40-18-18-18 Fax: (33) 2-40-18-19-60
Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom
Avenue de Rochepleine BP 123 38521 Saint-Egreve Cedex, France Tel: (33) 4-76-58-30-00 Fax: (33) 4-76-58-34-80
Asia
Room 1219 Chinachem Golden Plaza 77 Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369
ASIC/ASSP/Smart Cards
Zone Industrielle 13106 Rousset Cedex, France Tel: (33) 4-42-53-60-00 Fax: (33) 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel: (44) 1355-803-000 Fax: (44) 1355-242-743
Japan
9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL'S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL'S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel's products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
(c) Atmel Corporation 2006. All rights reserved. Atmel (R), logo and combinations thereof, Everywhere You Are (R) and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Printed on recycled paper.
4923AS-DVD-02/06


▲Up To Search▲   

 
Price & Availability of ATR0885

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X